Decompression-dehydration-drying device - Model lineup
Use: Concentrating and drying wastewater
Feature: This device is used to decompress, distill, concentrate and dry wastewater. Residual waste is discharged automatically at every set number.
Note: The specifications may change due to product improvement. We are afraid we can not fully guarantee our products. When introducing our device, please contact us.
[ Reference ]
Solid-liquid separation of high water content waste (Japanese) (PDF file)
Reduction of wastewater by Decompression-dehydration-drying device (Japanese) (PDF file)
Type : TAKE-GEN 100
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W1000*D2470*H2470 (Including control panel) |
| Disposal amount | About 80L/Hr - 100L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 1500Kg |
Required utility
| Electric power (standard body) |
3P 200V 3.45kw 50Hz 60Hz |
|---|---|
| Steam | 100kg/hr and over 0.4MPa - 0.8Mpa |
| Cooling water | 200L/min and over 30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 150
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W1050*D2702*H2600 (Including control panel) |
| Disposal amount | About 120L/Hr - 150L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 2000Kg |
Required utility
| Electric power (standard body) |
3P 200V 3.45kWh 50Hz 60Hz |
|---|---|
| Steam | 150kg/hr and over 0.3MPa - 0.8Mpa |
| Cooling water | 297L/min and over 30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 250
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W1300*D3671*H3000 (Including control panel) |
| Disposal amount | About 200L/Hr - 250L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 3000Kg |
Required utility
| Electric power (standard body) |
3P 200V 5.7kWh 50Hz 60Hz |
|---|---|
| Steam | 250kg/hr and over 0.3MPa - 0.8MPa |
| Cooling water | 479L/min and over 30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 300
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W1800*D2730*H2700 (Including control panel) |
| Disposal amount | About 240L/Hr - 300L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 3500Kg |
Required utility
| Electric power (standard body) |
3P 200V 6.4kWh 50Hz 60Hz |
|---|---|
| Steam | 300kg/hr and over 0.3MPa - 0.8MPa |
| Cooling water | 570L/min and over
30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 500
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W2375*D3835*H3000 |
| Disposal amount | About 400L/Hr - 500L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 5500Kg |
Required utility
| Electric power (standard body) |
3P 200V 10.9kWh 50Hz 60Hz |
|---|---|
| Steam | 500kg/hr and over 0.3MPa - 0.8MPa |
| Cooling water | 958L/min and over
30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 750
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W3592*D3671*H3100 (Including control panel) |
| Disposal amount | About 600L/Hr - 750L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 8000Kg |
Required utility
| Electric power (standard body) |
3P 200V 17.0kw 50Hz 60Hz |
|---|---|
| Steam | 750kg/hr and over 0.3MPa - 0.8MPa |
| Cooling water | 1437L/min and over 30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Type : TAKE-GEN 1000
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W4500*D4129*H3100 (Including control panel) |
| Disposal amount | About 800L/Hr - 1000L/Hr *Disposal amount varies subject to concentration and properties of waste liquid. |
| Equipment weight | 11000Kg |
Required utility
| Electric power (standard body) |
3P 200V 21.3kw 50Hz 60Hz |
|---|---|
| Steam | 1000kg/hr and over 0.3MPa - 0.8MPa |
| Cooling water | 1980L/min and over 30°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Use: Drying dehydration cake and sludge
Feature: This device is used to heat, dry and reduce the volume of dehydration cake or sludge treated by belt press or filter press under decompression.
Process: Charge > Drying > Discharge, repeat auto operation at set number.
Type : TAKE-GEN dry 250
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W1200*D3875*H3310 (Including control panel) |
| Disposal amount | About 350kg - 400kg/1 batch Disposal time takes 1 to 3 hours at 1 batch(including charging and discharging) |
| Equipment weight | 4500kg |
Required utility
| Electric power (standard body) |
3P 200V 13.2kw 50Hz 60Hz |
|---|---|
| Steam | 300kg/hr and over 0.4MPa and over |
| Cooling water | 500L/min and over
32°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Use: Recycling resin solvent
Feature: This device conducts solid-liquid separation of solvent in which resin is dissolved and recycling the solvent.
Separated and solidified resin is taken out and disposed as waste plastic.
Type : TAKE-GEN two stage distillation(15L)
| Processing method | Steam indirect heating method (two-stage distillation) |
|---|---|
| Outside dimension | W800*D1800*H1750 |
| Disposal amount | 15L/min |
| Equipment weight | 1500kg |
Required utility
| Electric power (standard body) |
3P 200V 13.2kw 50Hz 60Hz |
|---|---|
| Steam | 30kg/hr and over 0.3MPa and over |
| Cooling water | 20L/min and over
10°C and less 0.2MPa and over *Chill water is needed. |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
Above data is the case of 15L/Hr treatment.
Up to 300kg/hr of disposal capacity can be made.
Please consult us about processible solvent and resin concentration etc.
Use: small amount disposal / in-line installation
Feature: Low cost, space-saving, simple and easy in-line installation.
Indirect heating of heat carrier oil by electric heater is used for heating, resulting in no complex steam piping.
Type : Take-GEN 25
| Processing method | Steam indirect heating method |
|---|---|
| Outside dimension | W900*D1265*H1400 |
| Disposal amount | About 20L/Hr-25L/Hr |
| Equipment weight | 600kg |
Required utility
| Electric power (standard body) |
3P 200V 25kw 50Hz 60Hz |
|---|---|
| Steam | 30kg/hr and over 0.3MPa and over |
| Cooling water | 50L/min and over
32°C and less 0.2MPa and over |
| Air | 0.4MPa and over *Built-in compressor can be installed as needed. |
| Decompress-dehydration-drying device | System Outline | Flow of order | Delivery examples | Model lineup |
| Experiment data |